Hot dip galvanised mounting structures for rooftop and ground mount, with rails, mid and end clamps, grounding clips, splices and fasteners. Elevated arrays, carports and rooftop pergolas fabricated to site drawings. Tilt angle, span and wind-load rating are engineered to your site drawing.
| Model | Type | Finish |
|---|---|---|
| MBE-SMS-RT | Rooftop mounting structure | Hot dip galvanised |
| MBE-SMS-GM | Ground mount structure | Hot dip galvanised |
| MBE-SMS-EL | Elevated array structure | Hot dip galvanised |
| MBE-SMS-CP | Solar carport | Hot dip galvanised |
| MBE-SMS-PG | Rooftop solar pergola | Powder coated / galvanised |
| Model | Product | Material |
|---|---|---|
| MBE-SR | Mounting rails | Aluminium |
| MBE-SMC | Mid clamps | Aluminium / SS |
| MBE-SEC | End clamps | Aluminium / SS |
| MBE-SGC | Grounding clips | Stainless steel |
| MBE-SRS | Rail splice | Aluminium |
| MBE-SF | Fasteners, nuts & washers | Stainless steel |
Yes. Tilt angle, span, post spacing and wind load rating are engineered against your site layout. Send the drawing or the module and array details and we will work out the structure.
Hot dip galvanising bonds zinc through the whole surface including edges and welds, so it survives two decades outdoors. Paint and pre-galvanised sheet fail first at cut edges and fixing points, which is where rooftop structures usually corrode.
Yes, and that is the reason most solar customers come to us. Module earthing, structure bonding, lightning protection and the earth pits all come from one manufacturer, so the specification stays consistent across the plant.
